The Quick/Small/(Stupid?) Question Thread.

DIYs, FAQs, How-Tos and anything else that doesn't fit in another topic

Postby Volkmann77 » Thu Nov 15, 2018 3:27 pm

Does anybody have the dimensions of the glass for the front doors? Looks like I will need to have some fabricated.
Volkmann77 Offline


So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 50
Joined: Wed Nov 07, 2018 9:06 am
Has thanked: 4 times
Been thanked: 15 times
Location: North Carolina

Postby yuke175 » Wed Feb 20, 2019 6:33 pm

are the studs that connect the exhaust to the manifold pressed in? mine appear to be bent.
yuke175 Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 77
Joined: Tue Aug 01, 2017 12:50 pm
Has thanked: 0 time
Been thanked: 34 times
Location: Annapolis, MD

Postby Esteban » Wed Feb 20, 2019 9:28 pm

yuke175 wrote:are the studs that connect the exhaust to the manifold pressed in? mine appear to be bent.


They are screwed in the manifold. Might require some days of penetrating oil to get them out. You can try putting 2 nuts on each of them, and tighten the nuts together. Hopefully you'll be able to use a wrench and get the studs out.
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 2017
Joined: Sat Feb 23, 2013 11:28 am
Location: Ashburn, Virginia
Has thanked: 2339 times
Been thanked: 779 times
Location: Ashburn, VA

Previous

Return to General Tech

Who is online

Users browsing this forum: No registered users and 2 guests