The Quick/Small/(Stupid?) Question Thread.

DIYs, FAQs, How-Tos and anything else that doesn't fit in another topic

Postby nizmut » Sun Aug 11, 2019 2:07 pm

What is this?
20190811_104913-1280x1024.jpg
You do not have the required permissions to view the files attached to this post.
Robin
nizmut Offline

User avatar
You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 208
Images: 0
Joined: Sun Nov 10, 2013 8:41 pm
Has thanked: 55 times
Been thanked: 164 times
Location: Vallejo, Ca, USA

Postby Esteban » Sun Aug 11, 2019 2:40 pm

Looks like somebody capped the old style breather tube with that gizmo.

In older Patrols or in regions without emissions requirements, a chimney pipe coming out from that hole in the block allowed the crankcase fumes to vent freely.
Owner of the same Patrol since 1967
Esteban Online

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 2245
Joined: Sat Feb 23, 2013 11:28 am
Location: Ashburn, Virginia
Has thanked: 2929 times
Been thanked: 897 times
Location: Ashburn, VA

Postby nizmut » Sun Aug 11, 2019 3:19 pm

Guess I'll open it up and see if it is a pcv device.
Robin
nizmut Offline

User avatar
You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 208
Images: 0
Joined: Sun Nov 10, 2013 8:41 pm
Has thanked: 55 times
Been thanked: 164 times
Location: Vallejo, Ca, USA

Postby nizmut » Fri Aug 23, 2019 11:15 pm

What are you using for the heater fresh air flapper gasket?
Robin
nizmut Offline

User avatar
You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 208
Images: 0
Joined: Sun Nov 10, 2013 8:41 pm
Has thanked: 55 times
Been thanked: 164 times
Location: Vallejo, Ca, USA

Postby Mattbob53 » Sun Jan 19, 2020 7:38 pm

Body to frame bushings... two steal plates or one? Pretty sure I have seen both while talking apart.
Image


Sent from my iPhone using Tapatalk Pro
Mattbob53 Offline

User avatar
You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 179
Joined: Tue Nov 03, 2015 11:23 pm
Has thanked: 27 times
Been thanked: 111 times
Location: Phoenix

Postby moore_rb » Sun Jan 19, 2020 8:34 pm

Mattbob53 wrote:Body to frame bushings... two steal plates or one? Pretty sure I have seen both while talking apart.



One per body mount- Rubber against frame, then shim between rubber and body
"Saving the world- One Patrol at a time..."

ImageImageImageImage
moore_rb Offline

User avatar
Administrator
Administrator
 
Posts: 2111
Images: 68
Joined: Wed Jul 03, 2013 11:49 pm
Location: Arizona
Has thanked: 573 times
Been thanked: 888 times
Location: Arizona

Postby Mattbob53 » Sun Jan 19, 2020 8:44 pm

Thank you sir, going to make some new shims, does it make more sense to put shim in middle? Metal on metal isn’t some thing im use to


Sent from my iPhone using Tapatalk Pro
Mattbob53 Offline

User avatar
You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 179
Joined: Tue Nov 03, 2015 11:23 pm
Has thanked: 27 times
Been thanked: 111 times
Location: Phoenix

Postby Mattbob53 » Sun Jan 19, 2020 8:56 pm

Mattbob53 wrote:Thank you sir, going to make some new shims, does it make more sense to put shim in middle? Metal on metal isn’t some thing im use to. I made the rubber ones


Sent from my iPhone using Tapatalk Pro



Sent from my iPhone using Tapatalk Pro
Mattbob53 Offline

User avatar
You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 179
Joined: Tue Nov 03, 2015 11:23 pm
Has thanked: 27 times
Been thanked: 111 times
Location: Phoenix

Previous

Return to General Tech

Who is online

Users browsing this forum: No registered users and 1 guest

cron