Great Aussie vendor for parts

Original and compatible parts

Postby RMP&O » Tue Feb 09, 2016 11:47 pm

Been some talk about these guys on the forum. Mods put this thread wherever you think it belongs.

I recently bought a fairly large order from 4wd Products in Australia. These guys are top notch sellers, excellent service and great parts. The exchange rate right now is really good in our favor so it is a great time to buy Patrol parts.

http://stores.ebay.com/4wd-products?_tr ... 7675.l2563

I bought from these guys because I can get "kits" from them and I also wanted a nice Aussie clutch. I tried to get the Exedy clutch for the Patrol but it was back ordered for at least two months so I went with another quality Aussie clutch kit. I even got a clutch alignment tool included, for free. Any ways, box showed up yesterday, took about two weeks from time of purchase until it landed at my house. Here is what they supplied me with.

Complete clutch kit - quality Aussie brand
Front axle knuckle rebuild kit
Front axle wheel bearing kit
Rear axle wheel bearing kit
front & rear axle ring & pinion bearings, including the carrier bearings
dual circuit master cylinder
drive line u-joints
engine and trans mounts, metric

All bearings are quality Timkin and the u-joints are Toyo. Seals are also quality Japanese parts, no China parts!

Cheers
RMP&O Offline

User avatar
You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 414
Images: 80
Joined: Tue Apr 14, 2015 12:12 am
Has thanked: 181 times
Been thanked: 174 times
Location: Wyoming

Postby RiverPatrol » Tue Feb 09, 2016 11:59 pm

I added a link to them in the Links category.
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 7423
Images: 959
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 6753 times
Been thanked: 2280 times
Location: Temecula, CA

Postby Esteban » Wed Feb 10, 2016 9:59 am

RMP&O wrote:....
front & rear axle ring & pinion bearings, including the carrier bearings

All bearings are quality Timkin and the u-joints are Toyo. Seals are also quality Japanese parts, no China parts!

Cheers


Ian, are the carrier bearings the wider version?

The original ones are HR 32209JX, which I thought were unobtanium. I was only able to get 4T 32209 so I needed to add about 3mm of shims on each side, much like you did some years ago.
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Patrol Fanatic!
Patrol Fanatic!
 
Posts: 2849
Joined: Sat Feb 23, 2013 11:28 am
Location: Lutherville, MD
Has thanked: 5548 times
Been thanked: 1432 times
Location: Lutherville, MD


Return to Parts and Compatible Parts

Who is online

Users browsing this forum: No registered users and 1 guest

cron