Approaching a Motor Rebuild

Won't run? Engine, cooling system, fuel pump, carb, clutch, tranny, brakes, etc. The old messages from the NPCA 'Engine & Mechanical' category are here.

Postby yuke175 » Tue Aug 06, 2019 9:31 am

This post is for the noobs.

When approaching a P Motor, what parts are a no brainer to order and replace?

What parts are unobtanium?

I want to get everything squared away before I tear down this motor or bring it to a professional. Still undecided on which path I take.
yuke175 Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 82
Joined: Tue Aug 01, 2017 12:50 pm
Has thanked: 0 time
Been thanked: 37 times
Location: Annapolis, MD

Postby RiverPatrol » Tue Aug 06, 2019 9:50 am

A gasket kit to start. Most of the actual parts you can't pre-order, because you don't know what it's going to need until you tear it apart and inspect.
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5806
Images: 718
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3819 times
Been thanked: 1200 times
Location: Temecula, CA

Postby yuke175 » Tue Aug 06, 2019 10:07 am

I have an engine gasket kit here from ebay. Do they make then for the trans and transfer case?
yuke175 Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 82
Joined: Tue Aug 01, 2017 12:50 pm
Has thanked: 0 time
Been thanked: 37 times
Location: Annapolis, MD

Postby RiverPatrol » Tue Aug 06, 2019 3:49 pm

I have never seen one available.
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 5806
Images: 718
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 3819 times
Been thanked: 1200 times
Location: Temecula, CA

Postby Peter60 » Wed Aug 07, 2019 6:37 pm

Just found this rebuild set for a gearbox on eBay AU.

https://www.ebay.com.au/itm/Gearbox-Ove ... 3d5e300184

Its from 4WD products. No real detail on what is included.

I haven't used this product but have used other 4WD Products

http://www.ebaystores.com.au/4wd-produc ... 34.c0.m322
Not sure if I will get there.
Not sure if I will get back.
But I usually do!!!
Peter60 Offline


You know you own a Patrol when…
You know you own a Patrol when…
 
Posts: 169
Joined: Wed Mar 18, 2015 2:33 am
Has thanked: 98 times
Been thanked: 151 times
Location: Canberra, Australia

Postby yuke175 » Wed Oct 02, 2019 7:44 pm

mechanic tells me lifters are worn.

Any insight on replacements?
yuke175 Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 82
Joined: Tue Aug 01, 2017 12:50 pm
Has thanked: 0 time
Been thanked: 37 times
Location: Annapolis, MD

Postby Esteban » Wed Oct 02, 2019 7:59 pm

yuke175 wrote:mechanic tells me lifters are worn.

Any insight on replacements?


Sorry to hear that.

I've always wondered if the face could be resurfaced at a machine shop. I know the originals are hardened, but we have better oils today.
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 2191
Joined: Sat Feb 23, 2013 11:28 am
Location: Ashburn, Virginia
Has thanked: 2696 times
Been thanked: 870 times
Location: Ashburn, VA


Return to Engine and Mechanical

Who is online

Users browsing this forum: No registered users and 3 guests