Gas Tank Pickup Tube

Won't run? Engine, cooling system, fuel pump, carb, clutch, tranny, brakes, etc. The old messages from the NPCA 'Engine & Mechanical' category are here.

Postby jwptrol » Fri Sep 02, 2022 5:10 pm

What is the configuration of the 1965 gas tank pickup tube? Check ball? Engine runs on gas can so fuel pump works. Won't draw gas from tank. Line clear. Vehicle sat for a long time. Pickup tube has three screws that look like they've been soldered in by the factory. Doesn't look like it's going to come out easily. Cannot blow into tank with compressed air. Cannot get gas to flow with a hand operated suction pump. Thoughts?
jwptrol Offline


Lurker
Lurker
 
Posts: 2
Joined: Sat Aug 13, 2022 7:25 pm
Has thanked: 0 time
Been thanked: 0 time
Location: Idaho

Postby RiverPatrol » Fri Sep 02, 2022 9:04 pm

The pickup tube isn't removable from the tank. I went through the same thing last year. Your pickup tube is plugged at the bottom of the tank. I used cable on a drill to clear it. see the thread here: viewtopic.php?f=4&t=6022&p=48594&hilit=pickup+tube#p48594
Beyond any hope for intervention

Image
RiverPatrol Offline

User avatar
Administrator
Administrator
 
Posts: 7444
Images: 959
Joined: Thu Oct 04, 2012 10:42 am
Has thanked: 6800 times
Been thanked: 2297 times
Location: Temecula, CA

Postby jwptrol » Fri Sep 02, 2022 10:46 pm

RiverPatrol - thanks, I'll give it a shot. Much appreciated.
jwptrol Offline


Lurker
Lurker
 
Posts: 2
Joined: Sat Aug 13, 2022 7:25 pm
Has thanked: 0 time
Been thanked: 0 time
Location: Idaho


Return to Engine and Mechanical

Who is online

Users browsing this forum: Bing [Bot] and 2 guests