Photos of Seatbox

Got rust? Seats, panels, doors, windows, etc. The old messages from the NPCA 'Body & Interior' category are here.

Postby jawapro » Wed May 06, 2020 4:02 am

Hi all,

I'm sure there are plenty around but I wasn't able to find any in a quick search. Could someone send me some photos of the seatbox and how the standard Nissan seats attached? I'm not sure if it changed much, but I'm looking at 70s models.

Mine has been rather obviously modified and I'm looking to see how it should look if it was standard.

Image
Image
jawapro Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 75
Joined: Tue Feb 26, 2013 7:40 pm
Has thanked: 0 time
Been thanked: 43 times
Location: Tasmania

Postby Esteban » Wed May 06, 2020 7:19 am

From what I see in your photo, there’s only minor changes, with an angle added at the front, and a couple of brackets at the rear.

You can check photos at the personal gallery of member 50car, that has numerous ones showing that part of the body:


https://60patrol.com/forum/gallery/inde ... char=other

The changes over the years are minor, and concept wise, both are the same (only two versions?) the battery cover changed, and maybe tge location of the hinges/brackets for the seats.

Like your videos by the way!!
Owner of the same Patrol since 1967
Esteban Offline

User avatar
Helping others revive their Patrol…
Helping others revive their Patrol…
 
Posts: 2409
Joined: Sat Feb 23, 2013 11:28 am
Location: Baltimore, MD
Has thanked: 3652 times
Been thanked: 1002 times
Location: Baltimore, MD

Postby jawapro » Wed May 06, 2020 7:50 am

The angle at the front and some additional sections at the back to match the bucket seats that were in there. I'm not sure what has been removed though :?

None of mine have original seats (the Fire truck did I think but for some reason I didnt take photos of the seatbox before I scrapped it), and the rest of mine are currently inaccessible to me due to Corona restrictions anyway.

In order to get it registered here, seat mods will need to be approved by an engineer. Not sure how hard that's going to be yet.

Thanks for the comment about the videos - just documenting how little I know about working on cars. :D
Image
jawapro Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 75
Joined: Tue Feb 26, 2013 7:40 pm
Has thanked: 0 time
Been thanked: 43 times
Location: Tasmania

Postby ozscott » Tue May 19, 2020 7:09 am

I hope this pic helps.
IMG_1169.JPG
You do not have the required permissions to view the files attached to this post.
ozscott Offline


So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 37
Joined: Wed Jul 11, 2018 3:51 pm
Has thanked: 16 times
Been thanked: 48 times
Location: Melbourne, Australia

Postby jawapro » Tue May 19, 2020 7:39 am

Perfect, thanks
Image
jawapro Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 75
Joined: Tue Feb 26, 2013 7:40 pm
Has thanked: 0 time
Been thanked: 43 times
Location: Tasmania

Postby ozscott » Thu May 21, 2020 4:42 am

here are a couple more a bit closer of the seating mounts etc..
IMG_1174.JPG

IMG_1175.JPG

IMG_1176.JPG
You do not have the required permissions to view the files attached to this post.
ozscott Offline


So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 37
Joined: Wed Jul 11, 2018 3:51 pm
Has thanked: 16 times
Been thanked: 48 times
Location: Melbourne, Australia

Postby jawapro » Thu May 21, 2020 8:26 pm

Thanks mate!
Image
jawapro Offline

User avatar
So, I just bought this Patrol….
So, I just bought this Patrol….
 
Posts: 75
Joined: Tue Feb 26, 2013 7:40 pm
Has thanked: 0 time
Been thanked: 43 times
Location: Tasmania


Return to Body and Interior

Who is online

Users browsing this forum: No registered users and 1 guest

cron