by curlrider11 » Tue Jul 09, 2019 10:38 am
Don't mean to hijack the thread, but this is related to winches so i thought i'd ask here. Anyone experience difficulty shifting smoothly when installing the PTO?
I test fit a PTO transmission box that i have and I've experienced elevated noise from the winch transmission when not engaged (in neutral and not shifted to "on"), and now difficulty downshifting from 3rd to 2nd (doesn't want to go into 2nd easily) and from neutral to 1st at stops (needs to roll a tiny bit to engage). River, any experience with this and what might be a cause? oil levels are good, don't know if it's a shim/spacing issue. I used a sealant instead of a gasket to make a seal between the gearbox and transmission for the PTO.
If you want me to ask this q in another thread i can move it....
You do not have the required permissions to view the files attached to this post.
"The way of a fool is right in his own eyes, but a wise man listens to advice. " Pr. 12:15