Waiting on some parts for the windshield. So, dug into something that I have been dreading. When we re-wired the patrol, we put the fuseblock behind the dash - between the glovebox and steering wheel. When we did this, we ran wires underneath the steering column. That looks terrible with that amount of wires hanging down, so we need to position them above the steering column. So, we had to remove the steering wheel and steering column. in the process of doing this, I noticed that the splines on both the wheel and the column are worn.
The wheel is much more worn than the column. Is there a way to remedy this? Was thinking about taking it to a machine shop and seeing what they could do. Not sure if that is a pressed in part, or if it's part of the wheel. If it is pressed in, does anyone have a replacement part number?
thx.