60Patrol

Will the disk brakes work with 16 inch OEM wheels? Sorry it took me so long to reply to this, but here are the wheels that fit with this conversion. Specs: Brand: Wheel Vintiques Manufacturer's Part Number: 12-660604 Product Line: Wheel Vintiques 12 Series Smoothie Wheels Summit Racing Part Number:...

zed wrote: ↑Thu Feb 20, 2025 6:05 pm Paul,
Do you have any contacts in the printing / graphic arts industry who can reproduce them?
Selectro free wheeling hubs decal 2.jpg

Keith

Keith,

Do you know what the original dimensions were of this sticker? I may have a contact that could reproduce them.

Check this out, may be way easier.

https://youtu.be/tKJ7v5sxCic

You might look into something like this

https://www.amazon.com/United-Scientifi ... 0DER&gQT=1

What are the measurements of the tube?

Stetaylor2061 wrote: ↑Sun Dec 08, 2024 7:15 pm Will the disk brakes work with 16 inch OEM wheels?

Unfortunately I do not believe they will. I on using aftermarket rims, I will try to post up the info on them a little later.

-Does anyone know what the paint code is for the original colors of the engine block? -For the clutch, do you recommend that I have the original rebuilt, or is there a direct replacement? -Has anyone converted to fuel injection instead of the current oil bath set up? -Need to start thinking about t...

Looking for a favor from someone,

I was wondering if someone could take a max high temperature reading of the engine bay near the firewall/MC area with the hood closed and preferably after a bit of driving or during the drive. Any help would be appreciated.

Thanks in advance.

As for the fronts not locking up, you should be good with a 1" especially with a booster, you may need to adjust the pedal or check that the booster is working correctly. Another member installed a aftermarket 1" and it is working great after it was adjusted correctly. You can go with a l...

Peter60, Thanks for the write up and the feedback, I appreciate both. As for the fronts not locking up, you should be good with a 1" especially with a booster, you may need to adjust the pedal or check that the booster is working correctly. Another member installed a aftermarket 1" and it ...