Fabricated firewall mounted mirror post
-
- I love driving my Patrol!
- Posts: 1203
- Joined: Fri May 10, 2013 5:35 pm
- Location: Winslow
- Has thanked: 652 times
- Been thanked: 632 times
- Contact:
Fabricated firewall mounted mirror post
Mirror post
You do not have the required permissions to view the files attached to this post.
-
- Administrator
- Posts: 7815
- Joined: Thu Oct 04, 2012 10:42 am
- Location: Temecula, CA
- Has thanked: 7690 times
- Been thanked: 2476 times
- Contact:
-
- You know you own a Patrol when…
- Posts: 227
- Joined: Mon Jan 07, 2013 5:52 pm
- Location: Phoenix AZ
- Location: phoenix, AZ
- Has thanked: 59 times
- Been thanked: 56 times
- Contact:
Re: Fabricated firewall mounted mirror post
Ron, looks good!
Stay tuned this evening for the pics and measurements of the head... sorry its taken so long, I've been (literally) swamped...
Stay tuned this evening for the pics and measurements of the head... sorry its taken so long, I've been (literally) swamped...
1966 L60 Patrol
"Hey, watch this...!"
-probably what my last words will be.
"Hey, watch this...!"
-probably what my last words will be.
-
- You know you own a Patrol when…
- Posts: 227
- Joined: Mon Jan 07, 2013 5:52 pm
- Location: Phoenix AZ
- Location: phoenix, AZ
- Has thanked: 59 times
- Been thanked: 56 times
- Contact:
Re: Fabricated firewall mounted mirror post
Hey Ron, here's the pictures I promised of the mirror head...
diameter is 117 mm.... and that is with the slight arch in the backside. I don't have calipers but I would guesstimate maybe 2-4 mm less without the bow...
the side measures 9 mm.
I am about 2 hours from heading up to CO to visit Grenadier (Wade) and pick up some parts from him. This is a in and out trip, unfortunately not enough time for more than this... but I will bring along the mirror and if you like, let me know and I will drop if off on my way back home.
diameter is 117 mm.... and that is with the slight arch in the backside. I don't have calipers but I would guesstimate maybe 2-4 mm less without the bow...
the side measures 9 mm.
I am about 2 hours from heading up to CO to visit Grenadier (Wade) and pick up some parts from him. This is a in and out trip, unfortunately not enough time for more than this... but I will bring along the mirror and if you like, let me know and I will drop if off on my way back home.
1966 L60 Patrol
"Hey, watch this...!"
-probably what my last words will be.
"Hey, watch this...!"
-probably what my last words will be.
-
- I love driving my Patrol!
- Posts: 1203
- Joined: Fri May 10, 2013 5:35 pm
- Location: Winslow
- Has thanked: 652 times
- Been thanked: 632 times
- Contact:
Re: Fabricated firewall mounted mirror post
Well i do appreciate that, but i should be ok with the pic. But you are welcome to stop by if you find you have some xtra time. Thanks for the pic.
-
- I love driving my Patrol!
- Posts: 1076
- Joined: Wed Dec 05, 2012 4:25 pm
- Location: Geelong, Australia
- Has thanked: 84 times
- Been thanked: 327 times
- Contact:
Re: Fabricated firewall mounted mirror post
Oh God Michael is going to flip out! Get ready for a PM or 10 
1964 MWB Soft top Patrol - 1972 MWB Soft top Patrol "Diablo" - 1977 MWB V8 "Mr Muck" - 1978 G60 Patrol Ute "HP"
-
- I love driving my Patrol!
- Posts: 1203
- Joined: Fri May 10, 2013 5:35 pm
- Location: Winslow
- Has thanked: 652 times
- Been thanked: 632 times
- Contact:
Re: Fabricated firewall mounted mirror post
Hey Michael this is the original post that i have. $30.00+shipping, i believe shipping was around $20.00. So total would be $50.00. Also i found the pieces that hold the mirror on the post. These i will keep, but i do believe i can fabricate them. I won't know how much $ till i try. With these pieces you could install a mirror with the ball that Urban60 posted in another thread.