I am Pancho another Patrol addict as Esteban says
- Whole priming and painting piece by piece
- New front fenders (the originals where in bad condition due to corrosion and bad painting system)
- New rear panels, those located in the corners
- New foam and seat covers according to original specs.
- One wire alternator rated at 110 amp with electronic regulator
- High intensity beams (110W each)
- Pertronix as ignition system and 35,000 V Bosch coil
- Totally new clutch disc, plate and bearing.
- Changed crankshaft rear oil seal
- Gear box and transfer with new bearings and syncro rings.
- Installed AVM lock hubs for easy drive in high way conditions.
- Engine in good conditions with vacuum readings steady and compression test around 130 psi
- Switched from VC to VHA carburetor using brand new carb kit.
- All instruments working as they are supposed have to do. Installed additional voltmeter and vacuumeter.
- Tires 31x10.5xR15, the rear fenders where modified a bit to give enough space for the tires.
- Spring leafs and shackles are the original size but some of them new because were broken
Ok, that is what I did in my Patrol, another story is how much I spend on it,
Anyway, now is time to enjoy it as far as I can.
Thanks Esteban for inviting me here, is a very nice place.





