Scout SD33T and T19 trans

[RMP&O]

I bought this stuff in case I needed any parts in my Ute build. I also bought it for the flywheel, engine plate and bellhousing.

The head on the motor is toast, it was magnafluxed and is cracked. One piston shows slight damage, the other 5 all look good. This motor will need a rebuild and will need a new or second hand head sourced. I do have an old head from an SD33 N/A you can have, condition is unknown. Only difference in turbo to N/A head is steam ports and those can easily be drilled into the N/A head. I pulled the covers on the T19 trans and it looks good inside, it is included with the engine.

I paid $600 and I want $300. No starter, no flywheel, no bellhousing and no engine plate (some folks call this plate the factory adapter). Everything else is here. Best if you come pick this up and it is good for parts or if you are really motivated a rebuild.

Cheers