Original air cleaner setup?
-
- Patrol Newbie
- Posts: 9
- Joined: Thu Nov 30, 2023 7:21 pm
- Location: Idaho, USA
- Been thanked: 14 times
- Contact:
Original air cleaner setup?
I was finally able to secure an original air cleaner and I can see the studs it goes on to on the intake manifold however with it I got this vacuum fed piece with a spring on it and I don't know where that goes or what it does? Also does anyone have a source for the gasket that goes between the air cleaner and the carburetor? This one had part of one on it but the rubber head dried out and it came off in pieces.
You do not have the required permissions to view the files attached to this post.
-
- Administrator
- Posts: 7815
- Joined: Thu Oct 04, 2012 10:42 am
- Location: Temecula, CA
- Has thanked: 7690 times
- Been thanked: 2476 times
- Contact:
Re: Original air cleaner setup?
Okay, so the thing with the spring you don't need. That was the first attempt at a smog control device starting in '68. The vacuum lines connect to the distributor . You're fortunate that you have the mounting bracket on the bottom of the air cleaner, those are hard to come by.
Beyond any hope for intervention
