60Patrol

We just about have enough people and parts now to place an order. I do not want to exceed 100lbs per air freight package. As I said once an order is placed and PAID for it takes 20 days or less for me to receive the parts. Then I must ship them out to you as parts for more than one person in a box. Unless you make a large order, than it can be shipped directly to your door by UPS. Of course that would require pre-paid and I would like to try this out before I do more. I have done this before for myself so not the first time getting a package of Patrol parts from my sources. I will pay for the parts and all each of you needs to do is prepay for shipping the bulk package. Then when I get the parts you can pay for shipping from me to you and the actual items. The inital deposit that pays for the air freigth will be determind by the weight of the parts you want. A 100lbs package costs $300 to ship so if 6 people in on the cost it may be about $50 each. Seems good and fair to me. Some of the most requested parts I will price now. Like I say all these parts are brand new unless I say otherwise. They bolt right into all our Patrols with no mods. These prices are not set in stone and in the future I will be stocking this stuff so they may be less depending on what it costs me to get it here by sea. I am going into this for business so I will always do my best to keep prices as fair as I can. Personally I think Nissans prices are very high and a lot of this is priced under Nissan costs. -Rear Brake Cylinders: $55.00 each -Dual master cylinder assembly: $130.00 each -Floor pans (front): $85.00 each -Knuckle flange seals: $25 each for Japanese made, $18.00 each for other -Turn signals (front): $20 each -Drag link assembly: $150.00 each -Tie Rod, RHS (big one): $155.00 each -Tie rods ends (LHS): $55.00 each -Seat frame (front): $100.00 None of this can you get through a Nissan dealer so I hope it helps keep those Patrols rolling! Like I stated in the first post this is a trial; the parts are all ordered for each person who wants them. In the future I will stock parts so things will not be handled in this fashion. Just trying to see what kind of demand is out here and also get some people parts they need badly.   I have used rear leafs ready to ship. Price is $100 for the set plus shipping. Give me 2-4 weeks and I will have 3 used sets to choose from that will be sandblaster and primed, same price. I can supply new bushings, shackles and pins. For new Dobinsons rear leafs in a standard stack, a 5 pack, is $400 a set plus shipping. I paid $575 for a set of rear leafs from Nissan and the Dobinsons are just about as good. The Nissans took me 6 months to get, I can get the Dobinsons in 3-4 weeks. The rear leafs are about a 1.5 lift in standard stack.  Rear springs are also available in a HD stack of 8 leaves. All suspension bushings are available from either Dobinsons or Noltec. Used intake/exhaust manifolds are also available, these are good with no cracks. Price is $95 each plus shipping. Name what part you are looking for and I will say if I can get it, new or used. The tire cover Chris mentioned says Nissan Patrol in silver and the cover is black. I can get these in just about any size, price is about $80 each. Cost of shipping is simply from me to you.  All parts I sell bolt right in unless I note otherwise. I hope this clears some things up and I look forward to getting you people some parts! Please feel free to comment on anything. Ian RMP&O  

how bout a gas tank for a 65 ?

yes I have a used tank from a 65 Patrol, a used tank from a 67 Patrol and a used tank from a 64 patrol. Price is $100 plus shipping....I would have to check on a new tank. Thanks, Ian

Here is my list, any and all help is greatly appreciated. I have a '66 1 front turn signal (or just the lens, whatever I can get) both door latches and strikers (1 piece doors) all body rubber (door seals, hood blocks, window rubber) And of course brake parts, I want to go through the entire brake system, but I imagine that you will be stocking brake parts at some point so I don't think that is my priority at this time.

Ok folks...I think we have enough parts that you all want right now to place an order. Please everyone who wants to get their parts in this first order please email me so that we can work out the details one on one. email me here fuddruckers@earthlink.net    So you know, the deposit for the parts you want will be determinded by the parts you want. If all you want is a set of rear cylinders than your deposit will be small, if you want more than the deposit will be more. Shipping from me to you once I get the parts should be very reasonable and plain old normal UPS costs. Thanks a bunch and you will not be dissapointed with these parts! Since other people do not visit the board as often as some of us I would like it if people would continue to post items they need. This way I can stay on top of what people are after and keep you all posted on prices without a lot of delay. The time to get the parts is usually way under 20 days, I got my last shipment in 12 days but to give myself room I am saying 20 days or less. Last thing is once you get your parts please share with the rest of the members on how you like them quality wise and also how I handled your order...I aim to please!     Thanks, Ian

Oh! I almost forgot, side view mirror. I imagine several people need these. Thanks again!

; Hood bumpers and hardware, windshield pillar mount ; mirror, and a door handle for a 1967. If I am not too late?!; Thanks,;  ; David Collins

; Hi to every one I am looking for a crank shaft from a nissan patrol 1984 diesel.; thank you.; >From: "Nissan Patrol Club Albuquerque" ; >Reply-To: "Nissan Patrol Club Albuquerque" ; >To: "Nissan Patrol Club Albuquerque" ; >Subject: Re: Parts, Parts and more Parts! ; >Date: Wed, 22 Oct 2003 03:36:44 -0700 ; > ; Tired of spam? Get advanced junk mail protection with MSN 8.

None of you are to late to get in on the order. Yet, I need all of you to email me directly so we can work out the details on on one. Each of you will have a different deposit and I need to tell you cost, where to send deposit and exactly what parts I can get new, have used and can not source. Most all parts everyone listed are available new, just email me here fuddruckers@earthlink.net And just in case there is any doubt I will post a few pictures of the parts I can source...the people who have emailed me, I will respond tonight. Thanks again....Ian

Hey guys and gals,   Thought I would let you know that I have dealt a lot with Ian, either buying parts or just picking his brain. You have nothing to worry about when dealing with him. If he says it is good it is. He has a love for the patrols and a wealth of information.   Sometimes he may seem a bit gruff or be a little short tempered, but he is a great guy. He will go the extra mile to make sure you get what you need. He has been doing most of the work on his own rigs so he can help with most question. When I but parts from anyone I look most at customer service and Ian is no different, he has not brought this offer to us until he was sure of the quality of the parts and the relability of his sources. He is no nonsense kind of guy which will ensure that he is going to be on top of any supplier if there is any kind of problem. We couldn't ask for a better guy to be getting the parts from.   Feel free to e-mail me Vern tintfactory@tintfactory.com if you have any questions. Thanks