Re: Old Compatible Parts list
Posted: Wed Sep 03, 2014 8:38 pm
Just post them here, and the keeper of the list will update the list with your info. Thanks for providing it! 
60Patrol
An open forum for all enthusiasts of the classic 60 series Nissan Datsun Patrol to gather and share information and gain knowledge. Members share off-road stories, restoration advice, modification ideas in an atmosphere free of a single controller. The fo
https://60patrol.com/forum/
Old Compatible Parts list
Page 5 of 5
Re: Old Compatible Parts list
Posted: Thu Sep 04, 2014 1:08 pm
Like River said, any updates are appreciated. We will update as part numbers are provided. Thanks
Re: Old Compatible Parts list
Posted: Sun Sep 14, 2014 8:52 pm
Latest Version
Re: Old Compatible Parts list
Posted: Mon Oct 20, 2014 1:12 pm
Here are the part numbers for the seals and roller bearings to rebuild the PTO. I was able to purchase these through Purvis Bearings / Industries. There is also two cage needle bearings inside the PTO that I did not need to replace so I did not research them.
Re: Old Compatible Parts list
Posted: Mon Oct 20, 2014 8:41 pm
Can you let me know which bearing goes where? Thanks
Re: Old Compatible Parts list
Posted: Sat Nov 15, 2014 9:00 am
Jeff,50car wrote:Can you let me know which bearing goes where? Thanks
I would love to give you that tidbit of info but I just don't remember exactly. When you take it apart or maybe just pull the little covers off the sides, you will see the difference between the two. One has fewer larger ball bearings and the other has more smaller ball bearings. Sorry I couldn't be of more help here.
Re: Old Compatible Parts list
Posted: Sat Nov 15, 2014 9:48 am
No problem.
Re: Old Compatible Parts list
Posted: Sat Nov 15, 2014 1:47 pm
Latest version of the listing. Enjoy.
Re: Old Compatible Parts list
Posted: Mon Dec 15, 2014 2:42 pm
Thank you Jeff, you do a good job with this list. Its appreciated. 
Re: Old Compatible Parts list
Posted: Mon Dec 15, 2014 9:32 pm
Thanks.