60Patrol

Made it to the post office before they closed this time and picked them up. Thanks again.

Esteban,
The windshield rubber you sourced fit great.
Thank you very much for sourcing this part. (I am still on the hunt for a profile that is more easily accessible to Patrol owners without packing a suitcase and dealing with border patrol, customs, or Homeland Security.)
I am just thankful that my Patrol is now watertight.
Keith

Good morning fellas! I know this is an older post but I need to replace my windshield and weather stripping as well and want to make sure that I'm ordering the correct size/style. Can someone please confirm ? {see pics) Also, any dimensions on the front windshield glass size?

Frio Patrol wrote:Good morning fellas! I know this is an older post but I need to replace my windshield and weather stripping as well and want to make sure that I'm ordering the correct size/style. Can someone please confirm ? {see pics) Also, any dimensions on the front windshield glass size?

In my notes I have another link that member chrisvoinche posted some years ago, since he used it:

https://www.steelerubber.com/dense-rubb ... 60-0728-99

There you have the rubber profile image.

Regarding dimensions for the windshield, I have it at 14 3/4" x 55 7/8" wide with 3" radius for the corners. Theoretical length of the rubber is 136.1". So 12 ft of rubber will be good. (Disclaimer: Don't use this measurements to cut the glass. I still have to verify them) Measurements are good for ordering the rubber.

Thanks Esteban....order has been submitted! Now to get that new glass cut...

I was at the Solvang Datsun Roadster Rally in April and Ross Mullen from Sports Imports was there.
He has acquired all the Patrol rubber made by (I forget his name in So Cal) for the Patrol and I bought a whole set for very reasonable - he is liquidating stock and retiring. The parts I have are equivalent to the NOS I have in inventory, but I'm no expert. He wanter me to pass onto y'all that its last call for these parts in the near future. I can take photos and post if requested. He had several sets of everything.

https://sportsimports.ca/

The rubber parts have no information as to application. Are these correct for all years of 60 Patrols?

r1lark wrote:The rubber parts have no information as to application. Are these correct for all years of 60 Patrols?

For North American Patrols, yes.

I've tried reaching out to Ross a couple of times regarding these parts, I never hear back from him.

I reached out yesterday after seeing Toad's post.
Here is the image of a full kit I asked for.
Trying to confirm if there is enough gasket material for the rear and side windows as well.

Will let you know what he says if he responds.

Ross is back from vacation and is in Shedd OR working on a Datsun Roadster. He has many of the Patrol parts with him. He responded to my text but not email. 604-992-0747. Said he has ten or more full kits but is happy to sell parts as needed.