Re: 1967 Softop Project "Robin"
Posted: Fri Aug 14, 2020 2:48 pm
Shes all settled in the new home.
60Patrol
An open forum for all enthusiasts of the classic 60 series Nissan Datsun Patrol to gather and share information and gain knowledge. Members share off-road stories, restoration advice, modification ideas in an atmosphere free of a single controller. The fo
https://60patrol.com/forum/
1967 Softop Project "Robin"
Page 6 of 9
Re: 1967 Softop Project "Robin"
Posted: Fri Aug 14, 2020 2:57 pm
Looks like it belongs there.
Re: 1967 Softop Project "Robin"
Posted: Mon Sep 21, 2020 1:29 pm
Robin has finally come north to sit in the garage alongside the chasis in Massachusetts.
Re: 1967 Softop Project "Robin"
Posted: Wed Oct 21, 2020 2:57 pm
That clutch plate has a number that matches this link. Is this a new item that will work? Most folks on here mention having them resurfaced
https://www.nissanpartsdeal.com/parts/n ... n8400.html
https://www.nissanpartsdeal.com/parts/n ... n8400.html
Re: 1967 Softop Project "Robin"
Posted: Thu Oct 22, 2020 11:47 am
That clutch disk seems to be for a different model. I'm cross referencing to a 510 Datsun. It's only 200mm, and the Patrol is 275mm in diameter.rrbipu wrote:That clutch plate has a number that matches this link. Is this a new item that will work? Most folks on here mention having them resurfaced
https://www.nissanpartsdeal.com/parts/n ... n8400.html
Re: 1967 Softop Project "Robin"
Posted: Mon Oct 26, 2020 9:40 pm
Interesting.
This is a resurfaced plate that came out of the white patrol.
This is a resurfaced plate that came out of the white patrol.
Re: 1967 Softop Project "Robin"
Posted: Tue Jul 30, 2024 10:30 pm
Finally getting the garage insulated and squared away to get back on this project.
Re: 1967 Softop Project "Robin"
Posted: Mon Aug 19, 2024 11:46 am
Making some progress.
I was pleasantly surprised to see how clean the axle was inside. Right now my plan is to replace seals, sandblast, and paint. I don’t think it will need any major work.
I also have a disc brake conversion that a member on here made for me.
I was pleasantly surprised to see how clean the axle was inside. Right now my plan is to replace seals, sandblast, and paint. I don’t think it will need any major work.
I also have a disc brake conversion that a member on here made for me.
Re: 1967 Softop Project "Robin"
Posted: Tue Aug 20, 2024 9:49 am
Nice that you're finally getting a chance to work on it. There was a discussion on the disc brake mod. Depending on which one you have (there were a couple of different ones) you might want to review it here: https://60patrol.com/forum/viewtopic.php?t=6419
Re: 1967 Softop Project "Robin"
Posted: Sat Aug 31, 2024 9:52 am
More progress made. I was able to pull the front axle back out and tear it down.