Page 8 of 19
Re: Sierra Patrol's 1967
Posted: Thu Feb 21, 2013 1:43 am
by bosque
Now that looks like a plan.
The original does look pretty tough to fix.
Your moving forward and that is always great.
Thanks, good luck with the next stage.
Re: Sierra Patrol's 1967
Posted: Thu Feb 21, 2013 3:18 am
by miller
Nice one. I'd add a second drain hole while you're at it so when you stick the hose in there to clean it out the crap can be flushed out the other hole.
Re: Sierra Patrol's 1967
Posted: Thu Feb 21, 2013 10:04 am
by RiverPatrol
Re: Sierra Patrol's 1967
Posted: Thu Feb 21, 2013 10:08 am
by bosque
miller wrote:Nice one. I'd add a second drain hole while you're at it so when you stick the hose in there to clean it out the crap can be flushed out the other hole.
RiverPatrol wrote:
Patrol colonics?
Re: Sierra Patrol's 1967
Posted: Thu Feb 21, 2013 10:11 am
by Sierra Patrol
I already have three holes equally spaced on the pattern, I added them after I took the photo.
Re: Sierra Patrol's 1967
Posted: Thu Feb 28, 2013 3:59 pm
by Sierra Patrol
Plasma cut off the cross member....yummy...
IMAG0036.jpg
Re: Sierra Patrol's 1967
Posted: Thu Feb 28, 2013 4:49 pm
by RiverPatrol
Re: Sierra Patrol's 1967
Posted: Thu Feb 28, 2013 5:55 pm
by miller
Looks like she was pretty full!
Re: Sierra Patrol's 1967
Posted: Thu Feb 28, 2013 7:54 pm
by Sierra Patrol
Made a new one out of 3/16th steel, now I just have to drill three drain holes and flap disk the edges so it looks like its one piece.
IMAG0037.jpg
Re: Sierra Patrol's 1967
Posted: Thu Feb 28, 2013 8:50 pm
by Sierra Patrol
Corners rounded, three holes for drains, now just clean up attachment welds so it looks stock.
IMAG0039.jpg
