Front Door and Window Weather Striping!

npca-matt · Post by **npca-matt** » Mon Sep 24, 2001 9:06 pm

Can anyone tell me where I can get door and window rubber. I dont even have a any old stuff on my truck to compare it too. I have a '67 patrol. I will have pictures to post soon. Any help is greatly appreciated, Matt Jracecar@prodigy.netAttachment:

npca-leo · Post by **npca-leo** » Thu Nov 08, 2001 12:15 pm

I think my first attempt at sending this message went south So I'm starting over ...you might get both.....sent samples to The Filling Station in lebannon Oregon.....supplier of restoration stuff and they matched up something from Steele rubber products 70-0219-73 bar code 7-060-02760-9 this is for a group of vehicles from the late 40ties to the mid late 50ties....It fits the channel perfectly and has a portion that meets the door or? and seals the irregularities....I have the stuff for the sill also if you need some numbers I will dig it out.........

npca-grant · Post by **npca-grant** » Thu Nov 08, 2001 10:25 pm

LEO! Yes please! That is one of the things on my next list! Please, any part numbers, where you got it, how... all that stuff!! Oh and if you have a chance add said part numbers to the NISSAN PATROL CLUB's parts section i.e. PATROL INFORMATIONCompatible Parts Thanks Bud!! Grant

npca-leo · Post by **npca-leo** » Fri Nov 09, 2001 9:01 pm

Grant, got home after dark, no lights out in the shed, so sil rubber numbers tomorrow. Also for the door and window channel my 2nd choice was clean seals 104h3-100 which comes with an adhesive back and is about 53 per ft. cents retail. If you would like a sample send you address and I will cut off an inch or so and send it......hey any exterior door handles out there? Leo

npca-n2grass · Post by **npca-n2grass** » Mon Nov 12, 2001 11:57 pm

did you ever find the numbers in the garage. I would love to replace my door window seels..Thanks mark b n2grass@home.com

npca-grant · Post by **npca-grant** » Wed Nov 14, 2001 10:37 am

>>Grant, got home after dark, no lights out in the shed, so sil rubber >>numbers tomorrow. GREAT NEWS! >>Also for the door and window channel my 2nd choice was >>clean seals 104h3-100 which comes with an adhesive back >>and is about 53 per ft. cents retail. Sounds good. >>If you would like a sample send you address and I will cut >>off an inch or so and send it...... 251 N Roadrunner Pkwy #1607 Las Cruces, NM 88011 >>hey any exterior door handles out there? Not that I know of. Grant

npca-pudde · Post by **npca-pudde** » Thu Nov 22, 2001 11:03 am

hey leo...door handles.......what do yours look like?..i have a set off of doors......though its froma 66....BUT..i have my 66 and they dont even come close to being the same type.send me a pic if you have one so i can see..thx paul