'69 KL60 Camber issue

npca-jjones · Post by **npca-jjones** » Tue Jun 22, 2004 11:46 am

I need some help figuring out why my front tires are toed in at the bottom and out at the top (Camber). It is wearing the heck out of the outer portion of my tires (15" radials) and the book I have says that the camber is set at the time of manufacture and cannot be adjusted. However, it is visually out of whack and just plain hard on tires. Any suggestions would be helpful. Thanks.

npca-kaine69 · Post by **npca-kaine69** » Mon Dec 20, 2004 8:30 pm

I had the same problem on my 69. I put new shocks on and it straightened right out. I had the front end checked for allingment and it was fine.... New shocks worked for me I hope that helps.

npca-riverpatrol · Post by **npca-riverpatrol** » Tue Dec 21, 2004 12:38 am

Worn out springs can cause that problem, too.