Original Crank Handle
Posted: Sat Dec 22, 2012 4:36 am
Hi guy does any one have a spare or selling an original G60 60 series patrol crank handle for sale ?
60Patrol
An open forum for all enthusiasts of the classic 60 series Nissan Datsun Patrol to gather and share information and gain knowledge. Members share off-road stories, restoration advice, modification ideas in an atmosphere free of a single controller. The fo
https://60patrol.com/forum/
Original Crank Handle
Page 1 of 2
Re: Original Crank Handle
Posted: Sat Dec 22, 2012 9:49 am
You'll probably score one here. If you don't I read somewhere that old Landrovers used a similar crank. Good luck!
Re: Original Crank Handle
Posted: Sat Dec 22, 2012 11:24 am
I had bought on from a rover place in the US but they are out now and were not helpful. roversnorth.com
I would search ebay for a L.R. Series 2A (1969) #218508. Also check UK if not Aus.Nice thing to have but park on a hill and jump start is easier.
I would search ebay for a L.R. Series 2A (1969) #218508. Also check UK if not Aus.Nice thing to have but park on a hill and jump start is easier.
Re: Original Crank Handle
Posted: Sat Dec 22, 2012 3:18 pm
Very handy when adjustings the valves though!
Re: Original Crank Handle
Posted: Sat Dec 22, 2012 3:23 pm
Re: Original Crank Handle
Posted: Sat Dec 22, 2012 3:42 pm
I'd bet you could have any machinist shop create one for a reasonable price if you had the specs. I had thought about making one myself in our shop at work but that must have been a fleeting thought. This did remind me that I made an internal handle for my green machine from cast aluminum...wonder where that got to.
Tripper
Tripper
Re: Original Crank Handle
Posted: Sat Dec 22, 2012 5:28 pm
hey michael,i have a crank handle cant use it with v8 engine,pm me if your interested
Re: Original Crank Handle
Posted: Sat Dec 22, 2012 8:43 pm
cheers Mr Muck,i am interested,just sent you a pmmr muck wrote:hey michael,i have a crank handle cant use it with v8 engine,pm me if your interested
Re: Original Crank Handle
Posted: Sun Dec 23, 2012 12:44 am
Welcome Mr Muck, how's your SWB going, fixed up after the simo repairs.
You can make one easier enough, going to make a second one for up as need a longer one with the aftermarket bulbar
You can make one easier enough, going to make a second one for up as need a longer one with the aftermarket bulbar
Re: Original Crank Handle
Posted: Sun Dec 23, 2012 1:26 am
[quote="Swerve"]Welcome Mr Muck, how's your SWB going, fixed up after the simo repairs.
its actually a mwb steve,have't got around to fixing it properly yet,bush welding repairs are holding up well,plan is to fix shock towers +gearbox crossmember in the new year.
its actually a mwb steve,have't got around to fixing it properly yet,bush welding repairs are holding up well,plan is to fix shock towers +gearbox crossmember in the new year.