60Patrol

So as part of the (re)build for my '69 Patrol, I've got a few things I'm not going to be needing. Chief among them, the transmission/ transfer case and the front and rear axles. Here are some photos below. These are the first of what may be a number of things, I just won't know until we get deeper into the restoration and know what's definitely staying and what needs to go.

I'm not as interested in getting money for these parts as I am in helping out any of my fellow Patrol owners who might need them, so if you see something you like, pm me with offer and I'll most probably take it.

All parts are located in Broomfield, Colorado and can be picked up/shipped from a commercial auto shop. Obviously, the bigger stuff takes more coordination and while I am happy to be as helpful as possible, you pay for the shipping and arrange pick up. On the smaller stuff, if it's easier for me to ship it to you, I'll let you know what the shipping costs and expect you to cover that.

If you have any questions on anything, please let me know.

Thanks,

-Wade

And these.

I could use the knob and the rubber boots.
I'll PM you with the address.
Thanks,
Keith

Im looking for a left rear axel shaft.

Hey Bigjoe, welcome to 60Patrol!

What year Patrol is the axle for? Check out this post, the guy has several Patrols in Utah and is willing to sell parts. He can probably hook you up. http://www.60patrol.com/forum/viewtopic.php?f=16&t=2059

Hi BigJoe:

Both axles went to AZ Steve for his Patrol. Apologies for not updating my post.

-Wade

Are any of the goodies still available? After acquiring a second and third patrol, we think that we're going to restore a pair using only the third as the donor vehicle! As you can guess, I still have a fairly large parts list! For starters, I need one trans and transfer case, one front drive shaft and two rear drive shafts.

Thanks!

John

John:

Apologies for the late reply. I haven't logged in for quite awhile. All the parts I had are pretty much gone. Definitely the trans and transfer case. If you want to PM me a list of needs, I'll take a look and see if I have any of it.

Best,

-Wade Paschall