Brake master cylinder rebuild kit
Posted: Tue May 07, 2013 5:19 pm
Has anyone found a brake master cylinder rebuild kit that works for the L60/G60 Patrol?
Keith
Keith
60Patrol
An open forum for all enthusiasts of the classic 60 series Nissan Datsun Patrol to gather and share information and gain knowledge. Members share off-road stories, restoration advice, modification ideas in an atmosphere free of a single controller. The fo
https://60patrol.com/forum/
Brake master cylinder rebuild kit
Page 1 of 2
Re: Brake master cylinder rebuild kit
Posted: Tue May 07, 2013 5:39 pm
There's this one on eBay: http://www.ebay.com/itm/Nissan-Patrol-B ... 53dd3e5c30
Re: Brake master cylinder rebuild kit
Posted: Sun May 12, 2013 5:31 pm
The napa kit has the right cups, but you will have to use your piston. The piston in the kit wont work. Napa $15-$20 ebay $100+ but the one on ebay looks like the right piston.
Re: Brake master cylinder rebuild kit
Posted: Sun May 12, 2013 5:33 pm
Do you know the part number for the Napa kit?2869ral wrote:The napa kit has the right cups, but you will have to use your piston. The piston in the kit wont work. Napa $15-$20 ebay $100+ but the one on ebay looks like the right piston.
Re: Brake master cylinder rebuild kit
Posted: Sun May 12, 2013 9:34 pm
I dont recall, i thought i got it off the old parts compatability chart. I just looked at it but its not there. I will get napa to check my history and get back to you. 
Re: Brake master cylinder rebuild kit
Posted: Mon May 13, 2013 5:43 pm
Car Quest part# M162 $25.00. But you will have to reuse your piston.
Re: Brake master cylinder rebuild kit
Posted: Mon May 13, 2013 6:17 pm
Thank you.
Keith
Keith
Re: Brake master cylinder rebuild kit
Posted: Mon May 13, 2013 6:38 pm
Youre welcome, Napa cant cross that # but it fits an early 60s Ford Club wagon.
Re: Brake master cylinder rebuild kit
Posted: Mon May 13, 2013 6:44 pm
Raybestos part # MCK 35203, looks like they are on back order. If you get in a real bind PM me i have one.
Re: Brake master cylinder rebuild kit
Posted: Tue May 23, 2023 10:09 pm
I need to rebuild the BMC (again).
Identified these two (2) 7/8” kits mentioned in other threads:
Ford E100 Econoline Panel Van Pickup Master Cylinder Kit 61 62 63 64 65 66
https://www.ebay.com/itm/192895481840
and
1963-1964 Corvette Master Cylinder Rebuild Kit 7/8" Bore (Power & Non-Power)
https://www.ebay.com/itm/120799648661
Then Leslie (on Facebook) referenced a 1”(25.4mm) bore kit (https://www.ebay.com/itm/302404448131?h ... xGHm7YpnYs
Has anyone had recent experience with any of the kit? (FYI, I am working on a 1969 Patrol.)
Thanks,
Keith
Identified these two (2) 7/8” kits mentioned in other threads:
Ford E100 Econoline Panel Van Pickup Master Cylinder Kit 61 62 63 64 65 66
https://www.ebay.com/itm/192895481840
and
1963-1964 Corvette Master Cylinder Rebuild Kit 7/8" Bore (Power & Non-Power)
https://www.ebay.com/itm/120799648661
Then Leslie (on Facebook) referenced a 1”(25.4mm) bore kit (https://www.ebay.com/itm/302404448131?h ... xGHm7YpnYs
Has anyone had recent experience with any of the kit? (FYI, I am working on a 1969 Patrol.)
Thanks,
Keith