Page 1 of 4
Fabricated rear step
Posted: Thu May 30, 2013 1:58 pm
by Coyote Patrol
Post 68
Re: Fabricated rear step
Posted: Thu May 30, 2013 2:35 pm
by zed
Looks fantastic!!!!
What is the overall length?
What is the overall depth?
What is the overall height?
(Leslie's post
http://www.60patrol.com/forum/download/ ... &mode=view did not provide these last two dimensions.)
Keith
Re: Fabricated rear step
Posted: Thu May 30, 2013 3:23 pm
by Coyote Patrol
22 7/8" long, 6" deep, 7 7/8" high. Now the pic she shows for the post 68 has 3 stamped raised areas, i cannot duplicate that. This one has the two raised areas that i bent with a brake. Looks like the pre 68 step, but appropriate for the era.
Re: Fabricated rear step
Posted: Sun Jun 16, 2013 6:18 pm
by Coyote Patrol
Hi Keith, here is the finished rear step minus primer, total length is 22 5/8", step is 20"x5 3/4", bolt holes are 21 3/8"x2". If you like it i will primer it and send it within the next couple of days. Send me a PM with your address please. Thanks
Re: Fabricated rear step
Posted: Sun Jun 16, 2013 6:29 pm
by zed
Looks great!
Re: Fabricated rear step
Posted: Sun Jun 16, 2013 6:31 pm
by RiverPatrol
Re: Fabricated rear step
Posted: Tue Aug 20, 2013 5:42 pm
by Coyote Patrol
Ok Audrey, here is your pre 68 rear step. I will spray it black and send it out soon.
Re: Fabricated rear step
Posted: Wed Aug 21, 2013 2:44 pm
by Urban60
Beautiful!
I can hardly wait. I am such a fan!
Hey! by the way I have a hook and a hitch on the back of mine are either of them stock? and did the Patol have this type of backup light?
Re: Fabricated rear step
Posted: Wed Aug 21, 2013 2:50 pm
by bosque
Hook is stock. Light is inserted in the rear PTO/winch hole. The hitch is not stock, I dont think any Patrol came with a hitch!
(Double meaning!)
Re: Fabricated rear step
Posted: Thu Aug 22, 2013 5:15 am
by sleepyzzz
great fabrication, very nice
