Page 1 of 1
Seat rail needed
Posted: Wed Aug 13, 2014 7:49 pm
by ctcruiser
1967 driver side inner seat rail needed which is attached to the square tubing...
Re: Seat rail needed
Posted: Wed Aug 13, 2014 11:27 pm
by faux40
My seats came without sliders. They simply bolted the seat to the pivot. I plan to add in a section of tubing to raise the seat up that last 3/4" to match the passenger seat. At the same time I plan to move the seat back every fraction of an inch I can! It's way too close to the seat -- Even my 5'6" tall lovely wife wishes it were further back. My thought is that unless you have really short legs, you'll never want to slide the seat forward anyway!
John
Re: Seat rail needed
Posted: Sat Sep 06, 2014 7:50 pm
by IrishPatrol
I think Ive seen one on aboutTimespares site.
Re: Seat rail needed
Posted: Sat Sep 06, 2014 8:57 pm
by RiverPatrol
IrishPatrol wrote:I think Ive seen one on aboutTimespares site.
That one is for later model seats.
Re: Seat rail needed
Posted: Mon Sep 08, 2014 9:54 am
by parrock racing
Have a set of rails just let me know if you still need them
Re: Seat rail needed
Posted: Tue Sep 09, 2014 8:18 pm
by ctcruiser
yes i still need the drivers side, i sent you and email with my address
Re: Seat rail needed
Posted: Tue Sep 09, 2014 8:21 pm
by ctcruiser
parrock racing wrote:Have a set of rails just let me know if you still need them
yes i still need the drivers side, i sent you an email with my address