Lugnut & Stub Size

[L60Boerne]

Patrollees, Again both my Patrols are miles away so i can't just "go out and check" like normal.

Anyway. I could not find Lugnut/Stud sizes for the 60 Patrol so we looked them up in my O & M manual from Australia. Here is what I found. Please correct me, if wrong.

60 Series Patrol Manual

Diagram 45-2
Stud Hub Part # 40224-44000, Page 45-6
Nut Part # 40225-45460, Page 45-6

Jegs Response (www.jegs.com)
Based on the Nissan Part #s

Stud Size is 12mm x 1.25 mm
Nut (this type is closed end) 1.45" x 3/4" Hex
60 degree taper @ base

I am going back to take measurements of the actual lugnuts as the Jegs offering may not leave room to get the socket between the lugnut and front hub.

Patrols to Paradise,
L60Boerne

[zed]

Here are my notes:
30 needed

1/2”x20 5/8” length 13/16” hex
Dorman 611-016
Open style fine thread
Autozone $1.99

Gorilla Automotive
70087 clamshell (4)
70088 bulk (100)
70087B bags (4)

Keith

[L60Boerne]

Thanks Keith, Once again the forum pulls a fellow Patrolee out of the mud!

[zed]

All,
Has anyone identified a locking lug nut that clears the front locking hub and works with the steel wheels?
Thanks,
Keith

[L60Boerne]

Not me, said the Boerne flea.