Page 1 of 1
Side project
Posted: Wed Nov 23, 2016 11:21 pm
by Mattbob53
So I moved a few months ago, got most of the honey dews done. patrol is number one project in my books but not the wife's. I decided I need a powder coating oven to do what I wanted to do to the patrol. So, I decided to build one. It should fit about everything I need to coat and more. Total cost 175 bucks. Took a double oven cut it and put it back together.
https://goo.gl/photos/845c8QT9mebpe1Ds8
Sent from my iPhone using Tapatalk
Re: Side project
Posted: Wed Nov 23, 2016 11:48 pm
by Mattbob53
Some of my first test pices
Sent from my iPhone using Tapatalk
Re: Side project
Posted: Wed Nov 23, 2016 11:56 pm
by Mattbob53
And I build a table that it fits under out of and old boat trailer[img]http://uploads.tapatalk-cdn.com/20161124/f11388809bcc5aa55403a1e0658a7232.jpg[/img][img]http://uploads.tapatalk-cdn.com/20161124/ddd883a4ada3a23d643160bbc89d4438.jpg[/img]
Sent from my iPhone using Tapatalk
Re: Side project
Posted: Thu Nov 24, 2016 10:19 am
by RiverPatrol
Nice work!
Re: Side project
Posted: Sat Nov 26, 2016 5:22 am
by Mattbob53
Building a paint booth
Sent from my iPhone using Tapatalk
Side project
Posted: Thu Feb 02, 2017 10:26 pm
by Mattbob53
Back to the patrol... any advice on taking a 50 year old top off? All bolts are removed and I really don't want to create more work for myself. Old rubbers are stuck as it gets. Someone must have a trick Thanks in advance
Sent from my iPhone using Tapatalk
Re: Side project
Posted: Fri Feb 03, 2017 11:06 am
by RiverPatrol
A good shove will break the rubber loose. It is glued to one side, I don't recall which side though.
Re: Side project
Posted: Thu Feb 09, 2017 9:34 pm
by Mattbob53
Passenger side is glued. unfortunately my driver side is melted. Shoving isn't going to work. Got a piano wire and slowly having to work it off. On a good note I took a sliding window off and the metal frame is looks new, to bad i can't find rubbers 8)
Sent from my iPhone using Tapatalk