Page 2 of 2
Re: Tub removal
Posted: Sat Nov 14, 2015 7:13 am
by miller
Yes you could but you would need to be careful. The firewall is heavy and could bent the floor if not careful. I think 6 would be ideal.
Re: Tub removal
Posted: Tue Feb 21, 2023 5:46 am
by timber
Rolly wrote:Thanks all
Jeff, I see from your pic that your panel at the front of the tub is bigger than mine (I've got panel envy
) is that a SWB thing or maybe mine has been cut down as it's flush with the back box section. Here's some pics
IMG_1066.JPG
IMG_1066.JPG
I was actually wondering if anyone has cut and shut this panel to give more room to push the seats back. While I love this Patrol I remember my '71 seemed much more roomier (had the original seats), this one has my legs bumping into the steering wheel (I'm 6ft 2") and is generally uncomfortable with the gearstick sitting against my thigh.
I'm looking at making up some mounts to lift & fit the seats out of my Series 1 Discovery to allow for a bit more leg room but putting that panel back 8" would make a world of difference.
Has it been done that anyone knows of?
Rolly, did you end up cutting into the tub and tub divider to get more seat and leg room? Hope you're still around from 9 years ago....
Tom
Re: Tub removal
Posted: Sun Feb 25, 2024 5:58 pm
by Dixonsix
Hey Tom,
The previous owner of my Patrol cut the tub down even with the battery and tool box. From the look of the weld in the corners I am not sure if the tub can be separated without cutting the patch. I did not recognize this as atypical until viewing pictures on this page. I do not believe it was done to accommodate larger seats as the originals were in the rig when I got it. (currently at the upholsterer).
Now I just need to relocate the manual crank since half the wall is missing.
Re: Tub removal
Posted: Mon Feb 26, 2024 11:28 am
by RiverPatrol
A unibody.
