Page 1 of 2
Lubrication areas...
Posted: Mon Apr 20, 2015 3:57 pm
by offroadkid
Has, or does anyone ever lubricate their starter and clutch/brake pedals? I always looked at the bearing on the starter but until I read the owners manual didn't know that you could simply push it down and drop oil in it!! It says to use motor oil.
It also shows the area to add oil to the water pump!
Re: Lubrication areas...
Posted: Mon Apr 20, 2015 4:52 pm
by offroadkid
I looked but don't see the grease nipple on my water pump.
Re: Lubrication areas...
Posted: Mon Apr 20, 2015 7:23 pm
by Esteban
Maybe the water pump was replaced at some point. The newer design pump is lubricated for life, has a totally different bearing and seal.
I've always lubricated the starter motor and also the pedals. Not as often as called for. Hey, thanks for the reminder.
The oldest Patrol with the mechanical linkage for the clutch was fitted with 26 grease zerks! Probably the most of any 4wd ever.
Re: Lubrication areas...
Posted: Mon Apr 20, 2015 8:23 pm
by moore_rb
Esteban wrote:
The oldest Patrol with the mechanical linkage for the clutch was fitted with 26 grease zerks! Probably the most of any 4wd ever.
and I've got FOUR of them..... so over 100 zerks for me..
I better start buying my grease by the drum.
Re: Lubrication areas...
Posted: Mon Apr 20, 2015 10:08 pm
by offroadkid
Esteban wrote:The oldest Patrol with the mechanical linkage for the clutch was fitted with 26 grease zerks! Probably the most of any 4wd ever.
Funny you mention it! I have a '66 with a mechanical clutch and I had it up on the lift at work the other day and I thought I had got them all, until I climbed under it again today to find more that I missed by the levers to the transfer-case.
Re: Lubrication areas...
Posted: Mon Apr 20, 2015 10:26 pm
by RiverPatrol
The later water pumps, after about '65, didn't have the greasable bearing. So, there was no grease fitting for it.
Re: Lubrication areas...
Posted: Mon Apr 20, 2015 11:07 pm
by offroadkid
RiverPatrol wrote:The later water pumps, after about '65, didn't have the greasable bearing. So, there was no grease fitting for it.
Perfect, thanks! For some reason this thread doesn't give me the option to "thumbs-up" thank you!
Re: Lubrication areas...
Posted: Tue Apr 21, 2015 9:11 am
by faux40
offroadkid wrote:For some reason this thread doesn't give me the option to "thumbs-up" thank you!
I've noticed this too -- Does anybody know why this is?
Re: Lubrication areas...
Posted: Tue Apr 21, 2015 9:51 am
by RiverPatrol
faux40 wrote:offroadkid wrote:For some reason this thread doesn't give me the option to "thumbs-up" thank you!
I've noticed this too -- Does anybody know why this is?
This is the first time I have seen this. It's only missing on my post, still there on everyone else's. Hmmm...

Re: Lubrication areas...
Posted: Tue Apr 21, 2015 9:59 am
by faux40
It happens regularly -- I probably see it every couple weeks or so.