Page 1 of 1
Clutch Slave needed
Posted: Mon May 15, 2017 9:25 pm
by profsr
Hi Guys, Need a clutch slave. please let me know if you got one in working condition. If you have a recommendation for a replacement that would be great as well.
Thanks
Re: Clutch Slave needed
Posted: Tue May 16, 2017 9:14 am
by profsr
Anyone used the Protex one on sale on ebay?
Re: Clutch Slave needed
Posted: Wed May 17, 2017 4:44 am
by Peter60
We use Protex brake cylinders and clutch cylinders here is Oz. They are available on ebay as well as at retail stores. They are good components.
I think however that there are two slave clutch cylinders available for G60s. One for early models and one for later models. I don't know enough about them perhaps others may be able to comment.
Re: Clutch Slave needed
Posted: Wed May 17, 2017 9:44 am
by RiverPatrol
The clutch slave is the same through the series.
Re: Clutch Slave needed
Posted: Wed May 17, 2017 2:07 pm
by Esteban
RiverPatrol wrote:The clutch slave is the same through the series.
The only minor difference is that since 77 is metric, so might need to pay attention to the line fittings.
Re: Clutch Slave needed
Posted: Wed May 17, 2017 3:33 pm
by profsr
Re: Clutch Slave needed
Posted: Wed May 17, 2017 4:27 pm
by Flaggoni
That slave cyl works fine. I'm using one on my Patrol because I had it available. (Free)
The bolt spacing of the truck cyl is considerably narrower, necessitating slotting one hole completely to the edge, or milling both holes part way out.
Mild Bill